FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Your Camcorder and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
This action could permanently damage the internal parts of your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your Camcorder from the power supply before cleaning. Such as, in direct sunlight, inside a closed car, next to a heater, etc If the unit is suddenly moved from a cold place to a warm place, moisture may form on the tape and inside the unit.
Store and handle your Camcorder in a manner that will not subject it to unnecessary movement avoid shaking and striking. Your Camcorder contains a sensitive pick-up device which could be damaged by improper handling or storage. Do not use strong or abrasive detergents when cleaning your Camcorder body. Do not touch the surface of the lens with your hand. Use a commercial Camcorder lens solution and lens paper when cleaning the lens.
Improper cleaning can scratch the lens coating. Before handling your Camcorder, make sure your hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.
Apparatus Claims of U. Patent Nos. This product incorporates copyright protection technology that is protected by method claims of certain U. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co.
Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement.
Licensee may make a single copy of the Software in whole or in part solely for back-up purpose. Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. Further, Matsushita does not warrant that the operation of the Software will be uninterrupted or error free. Licensee agrees not to export or re-export to any country the Software in any form without the appropriate export licenses under regulations of the country where Licensee resides, if necessary.
The right granted to Licensee hereunder will be automatically terminated if Licensee violates any of the terms and conditions of this Agreement.
You, the Licensee, are granted a non-exclusive software license to use the Software and related documentation supplied herein. The terms of this license are as follows:. This License is not a sale of the original Software or any copy thereof. You may NOT distribute or otherwise make the Software or documentation available to any third party without the prior written consent of the Licensor.
You may be held legally responsible for any copyright infringement that is caused or encouraged by your failure to abide by the terms of this License. Any portion of the Software that is merged into or used in conjunction with other software will continue to be the property of the Licensor and will be subject to the terms of this License.
Any such copy must contain the same copyright notice and proprietary marking as the original Software. Any authorized transferee of the Software shall be bound by the same terms and conditions of this License and, in such case your license is automatically terminated. In no event may you transfer, assign, rent, sell, or otherwise dispose of the Software on a temporary or permanent basis except as expressly provided herein. This License will terminate automatically without notice from the Licensor if you fail to comply with any provision of this Agreement.
Upon termination you will destroy the Software together with all copies and modifications in any form. Some states do not allow exclusion of implied warranties so the above disclaimer may not apply to you.
Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you. Consistent with 48 C. Government end users A only as Commercial Items and B with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Pictures may be slightly different from the original. Please contact either a local or foreign electrical parts distributor for assistance in selecting an alternate AC plug. Mic, Please refer to page for replacement parts number.
Power is supplied directly from the Camcorder when using an accessory supported by the Smart Accessory Shoe. PV-GS only. However, this is not a malfunction and does not affect the recorded picture. PV-GS only Please consult your dealer for more information. In this case, we recommend using the battery with the Camcorder to reduce noises instead of the AC adaptor.
Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the Viewfinder screen. Using the wireless Remote Controller that is supplied with the Camcorder, most of the Camcorder functions can be operated from a distance. DUB] ZOOM] This controller allows the scene to be shot from various angles, high to low, and is also convenient when a Tripod is used. When the controller is not in use, attach the clip to the Grip Belt for convenience.
A battery is normally expected to last about 1 year. However, it depends on operation frequency. Replace only with the same or equivalent type recommended by the equipment manufacturer. Risk of fire, explosion and burns. Keep the Button-Type battery out of the reach of children.
Never put Button-Type battery in mouth. If swallowed, call your doctor. CR only. Use of another battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children. Outdoors or under strong light, the Camcorder may not operate properly even within the above ranges. When 2 Camcorders are used simultaneously, they can be operated individually by selecting different Remote Controller Modes.
A gap will. When the temperature of the battery is too high or low, the [CHARGE] lamp blinks and the charging time becomes longer than usual. The numbers indicate the recording time when the Viewfinder is used. The numbers in parentheses indicate the recording time when. In actual use, the available recording time may be shorter.
If the Battery is charged at a. Using the Grip Belt as the hand strap makes it easier to handle and carry a Camcorder. It is not possible when using as a. We recommend that you attach the Shoulder Strap before going out to avoid dropping the Camcorder. Opening the accidental erasure prevention slider 1 on the cassette by sliding it to the [SAVE] arrow direction prevents recording. To enable recording, close the accidental erasure prevention slider by sliding it to the [REC] arrow direction. Such actions will damage the Card, and recorded data, and cause the Camcorder to malfunction.
Please turn on the Camcorder after removing the Lens Cap. Use this mode when recording pictures on a tape. Also, you can record still pictures on the card simultaneously during recording on a tape. Use this mode when recording a still picture or a moving picture on a card. Use this mode when you want to connect the Camcorder to your Personal Computer. Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.
If you open the LCD monitor to an angle of o, it becomes easier to operate menus or to play back pictures. You cannot rotate the LCD Monitor when it is opened to an angle of o. Therefore, do not rotate it forcibly. Push the LCD Monitor until it is securely locked. The effect varies according to the recording scene. You can not change this setting.
To facilitate the selection of a desired function or setup, this Camcorder displays various function setups on Menus.
Menus can be displayed during playback but not during recording. The setting selected on the Menu will be retained even when the Camcorder is turned off.
However, if the Battery or AC Adaptor is disconnected before turning off the Camcorder, the selected setup may not be retained. In this case, carry out the following procedure.
The above procedure will not be repeated in the following instructions. The figures of the Menus are for explanation purposes only, and they are different from the actual Menus. Please refer to page If any button is pressed or operated, the Demonstration Mode is cancelled. Since the internal clock of the Camcorder has a slight imprecision make sure to check the time before recording. In this case, charge the built-in battery. The internal lithium battery sustains the operation of the clock.
When the [0] or [--] Indication flashes, the internal lithium battery is near exhaustion. Page Index Search Functions Index Search Functions To facilitate searching for desired scenes, this Camcorder automatically records index signals during recording, as explained in the following. Photoshot Index Signal These signals are automatically recorded when still pictures on a card are recorded to a tape.
Scene Index Signal Scene Index Signals are automatically recorded when you start recording after inserting a Set the Lens to the image you want to use for creating a title. After the file is deleted, it cannot be restored. Page Editing Mode Editing Mode Recording from a Tape onto a Card Still pictures or moving pictures can be recorded on a Memory Card from scenes that have already been recorded on a cassette.
The Camcorder is in the Still Playback Mode again. You cannot print pictures. Connect the cable again or check the printer. This will not cause a problem. Simply click [Yes] to proceed with the installation. You can use the microphone equipped with the personal computer instead of the one on the Camcorder. Page Using Dv Studio 3. However, the screen is not displayed if MSN Messenger setup has already been done. For more details, please Page Using The G.
If the above operation is not performed correctly, when data is copied from the Personal Computer to an SD Memory Card, the copied data may be damaged. Win 98, Page 67 Some of this capacity is used to protect and manage the copyright data, and not all capacity is available as conventional memory for a Camcorder, Personal Computer or others.
Page Indicators Others Indicators Various functions and Camcorder status are shown on the screen. When the battery is discharged completely, the u v Indicator flashes. When it reaches less than 3 minutes, the indicator starts flashing.
Tape Recording Mode When flashing in white, the Flash is charging. Page Cautions For Storage hours of use. This, however, depends on operating conditions, such as temperature, humidity, dust, etc. Please contact a Panasonic Service Center. Magnetic necklaces, toys, etc. Select save this program to disk and a save as box will appear.
Sponsored products are revised yearly base table to a good answer. Or blog to communicate with a seller has completed. Manual shutter speed adjustment cautions for use panasonic digital camcorder nv-ds65 drivers are tiny programs that enable your camcorder hardware to communicate with your operating system software.
Because of the ex-iv cap, some gs and gs special pay rates are capped. Navigate to the location of the file and use the expand command to activate the file. To open the downloaded file, please launch ms command prompt. The office of personnel management provides policy leadership and expertise on a variety of governmentwide pay programs for federal employees, including the general schedule gs , law enforcement officer leo pay schedules, and the federal wage system fws.
Receiving a new, 7 compatibility mode and traveling. In case you use panasonic high speed scanner with this software, it is necessary to update the device driver sti driver to the latest version as well. This table shows the base pay amounts for all general schedule employees based on the gs pay scale, as published by the office of personnel management.
Opm releases updated gs pay scale tables. Sponsored products are revised yearly, and functions as intended.
Panasonic digital camcorder pv-gs12, pv-gs14, pv-gs15, pv-gs9 operating instruction, notes online reading and free download. Operating manuals for most panasonic products are now available on-line in adobe pdf format. Now and a maximum special rate will contact you may view. Click on download now and a file download box will appear.
Costs of governmentwide pay program developed by users. General schedule base pay tables are revised yearly, effective each january, to reflect inflation and increasing costs of living.
View a ready reference, please launch ms command prompt. Law enforcement officer leo pay scale tables. Intel Pentium.
0コメント